Sutton Spot Weld Swan Neck Drill Bit 8 x 38mm
D204-Series Spot Weld Drills are designed for automotive vehicle body repairs. The can be used for quick and precise drilling through existing spot welds, releasing damaged panels and enabling replacements to be fitted.
These drills feature a spur point which is designed to cut through the weld while only leaving a slight mark on the second inner panel.
D204-Series Spot Weld Drills are specifically designed for use with pneumatic tools. They feaures a 60º taper on the shank which suits pneumatic spot weld disconnectors.
Features
Centre nib enables accurate positioning and less drilling pressure without work hardening
Shallow point design cuts through top panel while only slightly marking second panel
38mm short rigid drill designed for use with spot weld pneumatic disconnectors
Flatted shanks with 60° taper for good location in the disconnector
Made from HSS Co. The 8% cobalt formula improves abrasive & heat resistance, for increased strength at higher cutting temperatures
Specifications
Diameter: 8mm
Overall Length: 38mm
Shank: 8mm Cylindrical with Flat Side
Shank Taper: 60°